How to do the Installation with DIY Backyard Putting Green Kits?

Do you wish to practice golf in the privacy and comfort of your backyard? Then it can be fulfilled! But how? You need to install DIY backyard putting green kits.

Installing backyard putting green offers avid golf fans and homeowners an ideal opportunity to get the most out of it. Backyard putting greens enhance the beauty of your property landscape and provide a perfect setup to practice your golf game.

Diy Backyard Putting Green Kits

Here are the tips for installing DIY putting green turf in your backyard.

Select the Turf
Selecting a top-quality synthetic turf kit product for your backyard putting green offers you the best results. Artificial putting green turf kits require minimal maintenance and upkeep. It only requires occasional leaf blowing and cleaning to stay in the best possible condition. By installing synthetic DIY putting green turf in your backyard, you can spend more time practicing and less time in maintenance.

Find the Perfect Spot for Installation
Choose the perfect location for installing your putting green wisely. Look for an open spot on your property that has plenty of ventilation receives and receives sufficient sunlight. It ensures keeping the area surrounding your backyard putting green design healthy. For installation, find a space without any low spots. It ensures that your layout can sufficiently drain precipitation and moisture.

Measure the Area
It is essential to measure the installation space accurately. You can use a rope, cable, or garden hose for carefully measuring the area and outline the perimeter of the putting green. Paint the final design on the grass underneath.

Do the Necessary Digging and Contouring
Cut and trim the grass in the specific installation area. Start digging and contouring the spot to eliminate any soil clumps, branches, twigs, and debris. You can add or eliminate the dirt as per the requirement to develop the contours and curves that help in sharpening your putting game.

Perform the Installation
You need to cover the newly dug and contoured space of your backyard with landscape fabric. Secure the landscape fabric to the soil beneath with staples. Place the rubber panels from your synthetic putting green turf kit over the material. Press the putting green pieces together and hold each sheet in place using the fasteners. To track where you have installed the boards, place the putting green cups on them. Make sure to cut away the excess using a jigsaw. Around the panel, edges dig a 4-inch wide and 4-inch deep trench.

Roll Out the Turf:
It is time now to roll the synthetic putting green turf over the secured pieces. Fold back the putting green turf edge and secure the turf to the underneath panels using double-sided tape. You can use fabric spikes to secure the putting green turf to the ground. Once the putting green turf is locked in perfectly, fill in your trench and sweep off the turf to remove any debris.

That’s It! You are now ready to make the most out of your backyard putting green.
If you are ready to buy the top-quality DIY backyard putting green kits and perform the installation, rely on American Greens. Our highest quality DIY putting green kits come with a detailed instruction manual to help you throughout the installation process.

To improve your golf game and enhance your property value, consider installing our top-quality backyard putting green kits. Give us a call today at (877) 408-3636 to know more about our artificial putting green products and installation services!


Leave a Reply

Your email address will not be published. Required fields are marked *