Understanding The Cistern Parts To Fix The Probable Or Common Toilet Problems

Modern flushing toilets have many moving parts. All such elements run together to perform a smooth toileting experience. But will time and everyday use, such as moving parts wear out or even get damaged. A toilet, for example, may run intermittently because a portion of the cistern’s flapper valve opens slightly for a few minutes. In either case, you must determine whether there are broken toilet parts that require repair.

syphons

Water Trickling Into the Bowl

Do you ever notice that water in your cistern is refilled spontaneously even if you won’t flush it? Do you notice the toilet cistern gets on or off by itself or runs intermittently? It can be an issue which the plumbers call a phantom flush. It is nothing but a prolonged leak from the tank into the bowl, and it happens due to weak or damaged cistern parts (bad flapper or flapper seat). Again, it may be a prolonged leak from the tank into the bowl. Replacing the worn or damaged flapper or flapper seat can be a solution to bring a pause to the issue.

Water Trickling Into the Tank

Do you hear a sustained hissing sound coming from your toilet? It is probably happening due to water trickling into the tank via the supply pipe or tube. In this situation, noticing the floating ball cock, the refill tube and or inlet valve assembly is the way to trace the issues. Adjusting the float, checking the refill tube, valve, and overflow tube can help you find the solution, or you may replace the ballcock assembly to find a long-lasting solution.

thomas_dudley_cistern_fittings

The Bowl Empties Slowly

Is your toilet bowl emptying slowly? It may happen due to a weak flush or the clogged holes. Use a curved piece of wire to punch gently into each flush hole to clear the clogged holes. It will probably clear the blockage in the siphon jet in the bottom of the drain. Do you find leaks from the tank bolts or toilet flush valve? You need to remove the toilet tank from the bowl and replace the tank bolts, washers and gaskets on the flush valve. It is a simple way to make the toilet behave like new.

Adjust the float

Lift the rod gently and listen if your flapper valve has a ball that floats at the end of it. If the water stops flowing, you may be able to restart it by adjusting the float. The float ball lowers when the tank empties, and this tells the fill valve to start refilling. Make sure it’s adequately changed to stop the running water!

twyford_cistern_spares

The removing the clog

Clogs are the most common toilet problem. Clogged drain can be cleared using a variety of tools. When it comes to clearing minor clogs, a force-cup plunger outperforms the standard type. For serious clogs, use a closet auger to the clean the hole.

Leaky seals

A standard toilet has at least five or more seals. Almost all of them are subject to damage and leakage ultimately. The solution in each case is to identify the faulty or stiffen seals and replace it ASAP. Damage in the giant seal between the tank and bowl cause a significant leak. Replace the seal is a must to get rid of water leaks and you can do it by draining and removing the tank. Smaller seals at the mounting bolts and the ballcock’s base may also fail, resulting in minor but continuous leaks. Replace these in the same way. Tightening the bolts or mounting nuts occasionally is enough to stop the leak. If a broken flange causes the leak, get the help of a professional plumber.

wirquin_cistern_spares-1

Do you want to learn more about the common toilet problem, its potential issues or  solutions? The contact My Toilet Spares today. They can provide a numerous range of cistern parts irrespective of your toilet model!



Leave a Reply

Your email address will not be published.